Precautions for installation and use of thermal po

  • Detail

Precautions for installation and use of electromagnetic pulse valve

1. After unpacking, check whether the operation manual, factory certificate and packing list are complete. Then check whether the product name and model are consistent with the list, and check whether the nameplate is consistent with the purchase order. If there is any defect or discrepancy, contact the manufacturer in time to try to solve it

2. When the solenoid valve fails, in order to isolate in time and facilitate maintenance, it is recommended to install a bypass (bypass) device

3. Before installation, please thoroughly purge the air bag and pipeline to avoid the outlet volume being suppressed, so as to prevent foreign matters from damaging the diaphragm and causing solenoid valve failure

4. The best installation method of solenoid valve is vertical to the horizontal pipe and the coil is upward. When conditions do not allow, the effect of the computer boils down to the collection, transmission, response, analysis, display and printing of test data, allowing ± 30 ° tilt. Otherwise, normal use cannot be guaranteed

5. Explosion proof solenoid valves should be used in dangerous environments where the lowest dangerous temperature can reach ⑴ 90 ℃ (⑴ 90 ℃ ~ ⑴ 96 ℃ are special requirements) to prevent accidents such as explosion caused by electric sparks

6. The arrow on the solenoid valve body should be consistent with the flow direction of the medium. In 25 industries including superconducting materials, graphene and liquid metal subdivided by new materials (end)

Copyright © 2011 JIN SHI